|
|
 |
|
 |
• Fully
fabricated system
offers high
end aesthetics
• Rout &
Return (RR),
RainScreen (RS)
and Reveal (RV)
attachment
systems
• Dense core
provides ultimate
panel flatness
• Available
in Kynar 500®,
metallics &
anodized finishes
• Can be curved
to form clean,
graceful lines
|
|
|
|
|
Envelope 2000® is a composite
panel for exterior use made
by laminating an aluminum
skin to a substrate of thermoset
phenolic resin. A
second aluminum skin is
added
as a backer and provides
thermal stability and panel
balance. This system
is
designed for use as exterior
cladding on walls, canopies,
fascias, and accent bands.
However, Envelope 2000®
is also ideal for other
applications where a high
end look is desired.
Similar to Panel 20®, Envelope
2000® is impact resistant,
water resistant, and provides
ultimate smoothness in a
wide variety of finishes.
However, a thicker core
and fully
fabricated attachment systems
takes this panel to the
next level in exterior cladding. |
|
|
The Rout & Return System
(RR) is a barrier system
in which panels are fabricated
and formed into 'pans' and
then mounted onto the substrate
using aluminum extrusions.
All fasteners are concealed
and panel joints (1/2"
reveal typical) are finished
with
an approved sealant.
The RainScreen System (RS)
is based upon the 'rainscreen
principle' and allows
incidental water to enter
the cladding cavity, but
then be drained through
the system
via weepholes. Also
utilizing formed panels,
this system is mounted using
aluminum
extrusions. Panel
joints are finished using
color matched or complementary
accent
strips that 'float' within
the extrusions allowing
a reveal from 1/2"
to 12".
The Reveal System (RV) utilizes
one piece extruded aluminum
moldings. This barrier
system features a progressive
installation. The
moldings are mechanically
fastened
to the substrate and then
the panels are inserted
into the moldings, along
with
sealant. The panel
is adhered to the substrate
at the intermediates with
construction
adhesive. Reveal (1/2"
typical, 3" also available)
and batten profile moldings
are standard.
[View
Rout & Return (RR) System]
(shown above)
[View
RainScreen (RS) System]
[View
Reveal (RV) System with
Batten Moldings]
[View
Reveal (RV) System with
Reveal Moldings] |
|
|
 |
|
|
|
Component |
Standard (in) |
Metric (mm) |
• Prefinished
Smooth Aluminum Face
• Thermoset
Phenolic Resin Core
• Primed Smooth
Aluminum Backer |
.024"
.105"
.010" |
.609mm
2.67mm
.254mm |
|
|
|
|
[View
Panel] |
 |
|
|
|
Property |
Standard
(in) |
Metric (mm) |
|
• Panel Weight
• Nominal
Thickness |
1.33 lbs/ft²
1/8" |
6.47 kg/m²
mm |
|
|
|
 |
4' x 8'
4' x 10'
4' x 12'
5' x 8'
5' x 10'
5' x 12' |
48" x 96"
48" x 120"
48" x 144"
60" x 96"
60" x 120"
60" x 144" |
(1219mm x 2438mm)
(1219mm x 3048mm)
(1219mm x 3658mm)
(1524mm x 2438mm)
(1524mm x 3048mm)
(1524mm x 3658mm) |
|
|
|
 |
|
|
|
|
|
